Wheel Jack Buddy

Hits: 6681


Do you have a hi - lift or 4x4 jack, but no jacking points on your vehicle?
Don’t despair, the wheel jack buddy becomes your buddy. It simply bolts onto the nose of the jack. First loosen the wheel nuts slightly. Position the jack next to the wheel and raise the nose of the jack, with the jack buddy attached, up to the top side wall of the tyre. Now hook the two hooks of the jack buddy into the wheel spokes and take up slack. Check wheel chocks, hand brake and lowest gear. Jack the wheel off the ground and position axle stand under the axle to stabilise the vehicle.
Remove the jack and the wheel, then, reverse the operation once wheel is repaired or replaced. Do the final tightening of the wheel nuts once the wheel is firmly on the ground.
Remember safety first!